科研之友
微信
新浪微博
Facebook
分享链接
摘要
The paper presents the results of numerical simulations and experimental measurements of the epitaxial growth of gallium nitride in Metal Organic Vapor Phase Epitaxy within a AIX-200/4RF-S reactor. The aim was to develop optimal process conditions for obtaining the most homogeneous crystal layer. Since there are many factors influencing the chemical reactions on the crystal growth area such as: temperature, pressure, gas composition or reactor geometry, it is difficult to design an optimal process. In this study various process pressures and hydrogen volumetric flow rates have been considered. Due to the fact that it is not economically viable to test every combination of possible process conditions experimentally, detailed 3D modeling has been used to get an overview of the influence of process parameters. Numerical simulations increased the understanding of the epitaxial process by calculating the heat and mass transfer distribution during the growth of gallium nitride. Appropriate chemical reactions were included in the numerical model which allowed for the calculation of the growth rate of the substrate. The results obtained have been applied to optimize homogeneity of GaN film thickness and its growth rate.
- 出版日期2016-12
