3D reconstruction method and connectivity rules of fracture networks generated under different mining layouts

作者：Zhang Ru; Ai Ting^*; Li Hegui; Zhang Zetian; Liu Jianfeng

来源：International Journal of Mining Science and Technology, 2013, 23(6): 863-871.

DOI：10.1016/j.ijmst.2013.10.013

• 3D reconstruction
• Compression shear
• Connectivity level
• CT Image
• Fracture network
• Mining layouts
• Rock mechanics tests
• Tension-shear failures

In current research, a series of triaxial tests, which were employed to simulate three typical mining layouts (i.e., top-coal caving, non-pillar mining and protected coal seam mining), were conducted on coal by using MTS815 Flex Test GT rock mechanics test system, and the fracture networks in the broken coal samples were qualitatively and quantitatively investigated by employing CT scanning and 3D reconstruction techniques. This work aimed at providing a detail description on the micro-structure and fracture-connectivity characteristics of rupture coal samples under different mining layouts. The results show that: (i) for protected coal seam mining layout, the coal specimens failure is in a compression-shear manner and oppositely, (ii) the tension-shear failure phenomenon is observed for top-coal caving and non-pillar mining layouts. By investigating the connectivity features of the generated fractures in the direction of σ1under different mining layouts, it is found that the connectivity level of the fractures of the samples corresponding to non-pillar mining layout was the highest.

• 出版日期2013
• 单位四川大学