Mullite rod-enhanced porous SiC ceramics prepared at low temperature from photovoltaic waste

作者：Xing, Zhiheng; Xiang, Daoping^*; Ma, Yanping

来源：Journal of the European Ceramic Society, 2018, 38(15): 4842-4849.

DOI：10.1016/j.jeurceramsoc.2018.06.042

• Mullite rods
• Photovoltaic solid waste
• Porous SiC ceramic
• Low temperature preparation

In this paper, porous SiC ceramics (PSCs) were fabricated from photovoltaic waste at low temperatures. The effects of different additives and sintering temperatures on PSCs were studied in detail. The temperature of PSCs preparation can be reduced to 850 degrees C by adding MoO3 as catalyst. The PSCs are reinforced by mullite rods grown in-situ, they also have a high permeability coefficient due to their network structure. From 850 degrees C to 1200 degrees C, the open porosity of PSCs changed slightly, and was within 45.32 +/- 0.6%. The PSCs produced at 1000 degrees C had the highest gas permeability coefficient of 8.24 x 10(-11) m(2) and the highest flexural strength of 50.17 MPa. However, the same PSCs could not be fabricated at 850 degrees C when Y2O3 or CeO2 were used as sintering aids. This study provides an environment-friendly method for reusing photovoltaic waste and reducing the cost of preparing PSCs.

• 出版日期2018-12
• 单位海南大学