科研之友
微信
新浪微博
Facebook
分享链接
摘要
The machining precision plays an important role in the operation reliability and service life of screw rotors. However, the actual machined rotor profile of screw rotors is different from its theoretical profile due to the errors of the machine tool. This paper proposes a novel method of error tracing and compensation to reduce the machined errors of rotor profile on the basis of the limited sample trials, and the method is based on a matrix of error compensation. The errors of rotor profile are obtained based on limited sample trials machining of screw rotors, and fitted into piecewise smooth data. A matrix of error compensation is established to compute the errors of rotor profile to generate a compensated rotor profile. The compensated rotor profile is then used to regenerate forming tool and a new rotor product is processed on the same machine tool. And the errors of new rotor profile are smaller and can be reduced within (-0.01 mm, 0.01 mm) after compensations. Finally, the actual machining examples illustrate that the method of error compensation can not only satisfy the machining requirement of high-precision rotors, but also has the characteristics of good stability and applicability.
