Development of lightweight concrete with high resistance to water and chloride-ion penetration

作者：Liu Xuemei^*; Chia Kok Seng; Zhang Min Hong

来源：CEMENT & CONCRETE COMPOSITES, 2010, 32(10): 757-766.

DOI：10.1016/j.cemconcomp.2010.08.005

• Chloride-ion
• Concrete
• Internal curing
• Lightweight aggregate
• Permeability
• Porosity
• Sorptivity

This paper presents an experimental study to evaluate the influence of coarse lightweight aggregate (LWA), fine LWA and the quality of the paste matrix on water absorption and permeability, and resistance to chloride-ion penetration in concrete. The results indicate that incorporation of pre-soaked coarse LWA in concrete increases water sorptivity and permeability slightly compared to normal weight concrete (NWC) of similar water-to-cementitious materials ratio (w/cm). Furthermore, resistance of the sand-lightweight concrete (LWC) to water permeability and chloride-ion penetration decreases with an increase in porosity of the coarse LWA. The use of fine LWA including a crushed fraction <1.18 mm reduced resistance of the all-LWC to water and chloride-ion penetration compared with the sand-LWC which has the same coarse LWA. Overall, the quality of the paste matrix was dominant in controlling the transport properties of the concrete, regardless of porosity of the aggregates used. With low w/cm and silica fume, low unit weight LWC (similar to 1300 kg/m(3)) was produced with a higher resistance to water and chloride-ion penetration compared with NWC and LWC of higher unit weights.

• 出版日期2010-11