Multi-scale toughening of fibre composites using carbon nanofibres and z-pins

作者：Ladani Raj B; Ravindran Anil R; Wu Shuying; Pingkarawat Khomkrit; Kinloch Anthony J; Mouritz Adrian P; Ritchie Robert O; Wang Chun H

来源：Composites Science and Technology, 2016, 131: 98-109.

DOI：10.1016/j.compscitech.2016.06.005

• Synergism
• Delamination
• Fatigue
• Fibre bridging
• Bioinspired composite

Improving the interlaminar fracture toughness of fibre-reinforced composites based on thermosetting polymeric matrices is of significant interest to a broad range of applications. In the present work we report a multi-scale approach to synergistically toughen composites by combining nano- and macro-scale reinforcements inspired by natural composite materials. Carbon reinforcements with two different length scales are used: nano-scale carbon nanofibres (similar to 100 nm diameter) and macro-scale carbon z-pins (similar to 280 mu m diameter) to reinforce continuous carbon-fibre composites in the through thickness direction. The resultant composite, featuring three-dimensional reinforcement architecture, possesses triple toughening mechanisms at three different scales, thus yielding a synergistic effect. At the nano-scale, the carbon nanofibres alone promote high mode I delamination resistance (similar to 70% increase in interlaminar fracture energy) by multiple intrinsic and extrinsic toughening processes around the crack tip. The macro-size carbon z-pins, together with the crossover continuous fibres, promote a strong extrinsic toughening mechanism (similar to 200% increase in the interlaminar fracture energy) behind the crack tip and over a larger length-scale via both the z-pins and crossover fibres bridging the crack faces. When used concurrently, the nanofillers and z-pins promote a higher toughness under quasi-static loading (similar to 400% increase in fracture energy) than when used separately due to a multiplicative effect from the interplay between intrinsic and extrinsic toughening processes operative ahead of, and behind, the crack tip. Under mode I interlaminar cyclic-fatigue loading, the multi-scale laminates show a strong improvement in resistance against fatigue delamination growth. Similar to the synergistic increase in fracture energy, a greater increase in the delamination fatigue resistance occurs when both are active together. However, the results indicate that the synergistic effect of the multi-scale toughening is statistically significant under quasi-static loading but not under fatigue loading. A very small reduction (similar to 2%) in the tensile strength is observed for the multi -scale reinforced laminates.

• 出版日期2016-8-2