The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material

作者：Ghouse Shaaz; Babu Sarat; Van Arkel Richard J; Nai Kenneth; Hooper Paul A; Jeffers Jonathan R T^*

来源：Materials and Design, 2017, 131: 498-508.

DOI：10.1016/j.matdes.2017.06.041

• Porous material
• Architectured material
• Mechanical testing
• Scan strategy
• Laser parameter
• Powder bed fusion

Additive manufacturing enables architectured porousmaterial design, but 3D-CAD modelling of these materials is prohibitively computationally expensive. This bottleneck can be removed using a line-based representation of porous materials instead, with strut thickness controlled by the supplied laser energy.
This study investigated how laser energy and scan strategy affects strut thickness and mechanical strength of porous materials. Specimens were manufactured using varying laser parameters, 3 scan strategies (Contour, Points, Pulsing), 2 porous architectures and 2 materials (Titanium, Stainless Steel), with strut thickness, density, modulus, mechanical strength and build time measured.
Struts could be built successfully as low as 15 degrees with a minimum diameter of 0.13 mm. Strut thickness was linearly related to the specific enthalpy delivered by the laser to the melt-pool. For a given stiffness, Titanium specimens built at low power/slow speed had a 10% higher strength than those built at high power/fast speed. The opposite was found in Stainless Steel. As specimen stiffness increased, the Contour Strategy produced samples with the highest strength: stiffness and strength: weight ratio. The Points strategy offered the fastest build time, 20% and 100% faster than the Contour and Pulsing strategies, respectively. This work highlights the importance of optimising build parameters to maximize mechanical performance.

• 出版日期2017-10-5