Designing a solar powered Stirling heat engine based on multiple criteria: Maximized thermal efficiency and power

作者：Ahmadi, Mohammad Hossein; Sayyaadi, Hoseyn^*; Dehghani, Saeed; Hosseinzade, Hadi

来源：Energy Conversion and Management, 2013, 75: 282-291.

DOI：10.1016/j.enconman.2013.06.025

• Decision-making
• Evolutionary algorithms
• Multi-objective optimization
• Thermodynamic analysis
• Solar-dish Stirling engine

A solar-powered high temperature differential Stirling engine was considered for optimization using multiple criteria. A thermal model was developed so that the output power and thermal efficiency of the solar Stirling system with finite rate of heat transfer, regenerative heat loss, conductive thermal bridging loss, finite regeneration process time and imperfect performance of the dish collector could be obtained. The output power and overall thermal efficiency were considered for simultaneous maximization. Multi-objective evolutionary algorithms (MOEAs) based on the NSGA-II algorithm were employed while the solar absorber temperature and the highest and lowest temperatures of the working fluid were considered the decision variables. The Pareto optimal frontier was obtained and a final optimal solution was also selected using various decision-making methods including the fuzzy Bellman-Zadeh, LINMAP and TOPSIS. It was found that multi-objective optimization could yield results with a relatively low deviation from the ideal solution in comparison to the conventional single objective approach. Furthermore, it was shown that, if the weight of thermal efficiency as one of the objective functions is considered to be greater than weight of the power objective, lower absorber temperature and low temperature ratio should be considered in the design of the Stirling engine.

• 出版日期2013-11