Analysis of perforation process into concrete/metal targets by rigid projectiles

作者：Khazraiyan N^*; Liaghat G H; Khodarahmi H; Dashtian Gerami N

来源：Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science , 2013, 227(7): 1454-1468.

DOI：10.1177/0954406212462198

• Perforation process
• concrete
• metal target
• semi-analytical model
• rigid projectile

In this article, a semi-analytical model has been developed for perforation of a hard projectile into a single- and two-layer concrete targets. The model is based on the dynamic cavity expansion theory and the reflection of compressive waves from the end of the concrete targets. The effect of friction coefficient is also investigated in the analysis. Numerical modeling of the problem has been performed in LS-DYNA code. Holmquist-Johnson-Cook, plastic kinematic, and rigid material models have been employed for the concrete, the backing plate, and the projectile, respectively. The impact velocity range, considered in this study, is between 300 and 800m/s. No projectile erosion is considered in this velocity range. The analytical results of the investigation for both single- and two-layer concrete targets are in a good agreement with numerical simulations and experimental data.

• 出版日期2013-7