摘要

The paper is devoted to the development of an asymptotic approach to solution of the steady isothermal problem of elastohydrodynamic lubrication (EHL) for heavily loaded point contacts. It is shown that the whole contact region can be subdivided into three subregions: the central one that is adjacent to the other two regions occupied by the ends of the horseshoe-shaped pressure/gap distribution zone. The central region, in turn, can be subdivided into the Hertzian region and its adjacent inlet and exit zones that, in turn, are adjacent to the inlet and exit boundaries of the contact, respectively. Moreover, in the central region, in the inlet and exit zones of heavily loaded point EHL contact, the EHL problem can be reduced to asymptotically valid equations identical to the ones obtained in the inlet and exit zones of heavily loaded line EHL contacts. The latter means that many of the well-known properties of heavily loaded line EHL contacts are also valid for heavily loaded point EHL contacts. These asymptotically valid equations can be analysed and numerically solved based on the stable methods using a specific regularisation approach that were developed for lubricated line contacts. Cases of pre-critical and over-critical lubrication regimes are considered. The by-product of this asymptotic analysis is an easy analytical derivation of formulas for the lubrication film thickness for pre-critical and over-critical lubrication regimes. The method is validated by the results of some experimental and numerical studies published by a number of researches.

  • 出版日期2013-12

全文