A Comparative Evaluation of the Wear Resistance of Various Tool Materials in Friction Stir Welding of Metal Matrix Composites

作者：Prater T^*; Strauss Alvin; Cook George; Gibson Brian; Cox Chase

来源：Journal of Materials Engineering and Performance, 2013, 22(6): 1807-1813.

DOI：10.1007/s11665-012-0468-9

• friction stir welding
• materials selection
• metal matrix composites
• tool wear

Friction stir welding (FSW) is the preferred joining method for metal-matrix composites (MMCs). As a solid-state process, it precludes formation of the intermetallic precipitates responsible for degradation of mechanical properties in fusion welds of MMCs. The major barrier to FSW of MMCs is the rapid and severe wear of the welding pin tool, a consequence of prolonged contact between the tool and the harder reinforcements which give the material its enhanced strength. This study evaluates the effectiveness of harder tool materials to combat wear in the FSW of MMCs. The tool materials considered are O1 steel, cemented carbide (WC-Co) of the micrograin and submicrograin varieties, and WC-Co coated with diamond. The challenges which accompany the application of harder tool materials and diamond coatings in FSW are also discussed. This study represents the first use of diamond-coated tools in FSW and the first comparative evaluation of tool materials for this application.

• 出版日期2013-6