Microtexture Development of Niobium in a Multilayered Ti/Al/Nb Composite Produced by Accumulative Roll Bonding

作者：Qu Peng; Zhou Liming; Xu Hui; Acoff Viola L^*

来源：Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2014, 45A(13): 6217-6230.

DOI：10.1007/s11661-014-2545-1

Multilayered Ti/Al/Nb composites were produced by the accumulative roll bonding (ARB) process utilizing pure Ti, Al, and Nb element sheets. Up to four cycles of ARB were applied to the composites. The microstructure and texture evolution on the Nb phase were studied by X-ray diffraction (XRD), transmission electron microscopy, scanning electron microscopy, and electron backscattered diffraction. Nb and Ti layers necked and fractured as the number of ARB passes increased. After four ARB cycles, a nearly homogeneous distribution of Nb and Ti layers in Al matrix was achieved. As-received Nb sheet exhibited a fully lamellar structure and had a strong cold-rolling texture. After subjecting to ARB, slight grain refining was observed and the high-angle boundary fraction was increased. The intensity of the alpha-fiber was weakened, while that of the gamma-fiber was strengthened during ARB. The texture evolution was attributed to partial recrystallization during the ARB process as a result of adiabatic heating.

• 出版日期2014-12