A study on low magnetic permeability gas tungsten arc weldment of AISI 316LN stainless steel for application in electron accelerator

作者：Kumar Abhay; Soni R K; Ganesh P; Kaul Rakesh^*; Bhatnagar V K; Dwivedi Jishnu; Kukreja L M

来源：Materials & Design, 2014, 53: 86-92.

DOI：10.1016/j.matdes.2013.06.029

• Accelerator
• Austenitic stainless steel
• Non-magnetic weld
• Delta ferrite free weld
• High Mn filler
• Solidification cracking

Low magnetic permeability is an important criterion in selection of the material of construction of beam pipes and vacuum chambers of electron accelerators for safeguarding against distortion of the magnetic field. In the modified design of new 20 MeV/30 mA Injector Microtron for the existing synchrotron radiation sources Indus-1 and Indus-2, AISI 316 LN stainless steel has been identified as the material of construction of its vacuum chamber. Welding of AISI 316LN stainless steel with conventional filler alloys like ER316L and ER317L of AWS A5.9 produces duplex weld metal with 3-8% ferro-magnetic delta ferrite to avoid solidification cracking. The results of the study has demonstrated that GTAW of AISI 316LN SS with high Mn adaptation of W 18 16 5 N L filler produced a crack free non-magnetic weld with acceptable mechanical properties. Moreover, AISI 316LN stainless steel is not required to be solution annealed after the final forming operation for obtaining a low magnetic permeability, thereby avoiding solution annealing of large vacuum chamber in vacuum/controlled atmosphere furnace and associated problems of distortion. Besides Injector Microtron, the study also provides useful input for design of future indigenous accelerators with vacuum chambers of austenitic stainless steel.

• 出版日期2014-1