Application of variational mode decomposition energy distribution to bearing fault diagnosis in a wind turbine

作者：An Xueli^*; Tang Yongjun

来源：TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 2017, 39(7): 1000-1006.

DOI：10.1177/0142331215626247

• Wind turbine
• spherical roller bearing
• fault diagnosis
• variational mode decomposition
• energy distribution

For the unsteady characteristics of a fault vibration signal of a wind turbine's rolling bearing, a bearing fault diagnosis method based on variational mode decomposition of the energy distribution is proposed. Firstly, variational mode decomposition is used to decompose the original vibration signal into a finite number of stationary components. Then, some components which comprise the major fault information are selected for further analysis. When a rolling bearing fault occurs, the energy in different frequency bands of the vibration acceleration signals will change. Energy characteristic parameters can then be extracted from each component as the input parameters of the classifier, based on the K nearest neighbour algorithm. This can identify the type of fault in the rolling bearing. The vibration signals from a spherical roller bearing in its normal state, with an outer race fault, with an inner race fault and with a roller fault were analyzed. The results showed that the proposed method (variational mode decomposition is used as a pre-processor to extract the energy of each frequency band as the characteristic parameter) can identify the working state and fault type of rolling bearings in a wind turbine.

• 出版日期2017-7
• 单位中国水利水电科学研究院