AN ELECTROCHEMICAL PROCESSING STRATEGY FOR IMPROVING TRIBOLOGICAL PERFORMANCE OF AISI 316 STAINLESS STEEL UNDER GREASE LUBRICATION

作者：Zou, Jiaojuan; Li, Maolin; Lin, Naiming^*; Zhang, Xiangyu; Qin, Lin; Tang, Bin

来源：Surface Review and Letters, 2014, 21(1): 1450006.

DOI：10.1142/S0218625X14500061

• Electrochemical processing
• tribology
• performance
• stainless steel
• grease lubrication

In order to improve the tribological performance of AISI 316 stainless steel (316 SS) under grease lubrication, electrochemical processing was conducted on it to obtain a rough (surface texturing-like) surface by making use of the high sensitivity of austenitic stainless steel to pitting corrosion in Cl--rich environment. Numerous corrosion pits or micro-ditches acted as micro-reservoirs on the obtained surface. While the grease could offer consistent lubrication, and then improve the tribological performance of 316 SS. Tribological behaviors of raw 316 SS and the treated sample were measured using a reciprocating type tribometer sliding against GCr15 steel counterpart under dry and grease lubrication conditions. The results showed that the mass losses of the two samples were in the same order of magnitude, and the raw sample exhibited lower friction coefficient in dry sliding. When the tests were conducted under grease lubrication condition, the friction coefficients and mass losses of the treated sample were far lower than those of the raw 316 SS. The tribological performance of 316 SS under grease lubrication was drastically improved after electrochemical processing.

• 出版日期2014-2
• 单位太原理工大学; 环境保护部核与辐射安全中心