A Revised Criterion for the Portevin-Le ChA cent telier Effect Based on the Strain-Rate Sensitivity of the Work-Hardening Rate

作者：Van Liempt Peter^*; Sietsma Jilt

来源：Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2011, 42A(13): 4008-4014.

DOI：10.1007/s11661-011-0850-5

An improved analysis is presented of the stability of plastic deformation under conditions where dynamic strain aging (DSA) occurs, which leads to instabilities known as the Portevin-Le ChA cent telier (PLC) effect. It is shown that PLC instabilities can occur for conditions that are not covered by the currently prevailing criterion presented by Estrin and Kubin (1991), which focuses on a negative strain rate sensitivity of the flow stress, caused by interactions of solutes with thermally activated glide of mobile dislocations. The current analysis recognizes that the strain-rate sensitivity of the flow stress consists of two contributions, one associated with glide of mobile dislocations and the second with work hardening, related to storage of immobile dislocations. In this paper, an instability criterion is proposed that takes into account the possibility of a negative strain-rate sensitivity of the work-hardening rate, which is caused by diffusion of solutes to immobile dislocations. The latter contribution leads to an extended instability criterion. This criterion also provides an explanation for the existence of a critical strain above which instabilities occur. In this article, previously published tensile test data are used to show that a negative strain-rate sensitivity of the work-hardening rate, which influences significantly the occurrence of the PLC effect, can indeed occur under DSA conditions.

• 出版日期2011-12