Magnetic layered structure for the production of polarized neutron microbeams

作者：Kozhevnikov S V^*; Ruehm A; Ott F; Pleshanov N K; Major J

来源：Physica B: Condensed Matter , 2011, 406(12): 2463-2466.

DOI：10.1016/j.physb.2010.11.063

• Polarized neutrons
• Waveguide
• Microbeam

A neutron waveguide is a three-layer structure in which a guiding layer with low optical potential is placed between two cladding layers with high optical potential. Under proper operation conditions, the neutron density is resonantly enhanced inside the guiding layer. In our experimental scheme, the neutron beam enters through the surface of the top layer at glancing angle and goes out from the edge of the guiding layer, with an angular distribution corresponding to Fraunhofer diffraction from a narrow slit. The incident neutron beam is relatively wide (0.1 mm) and highly collimated (0.01 degrees). The outgoing sub-micron beam is extremely narrow at the outlet (0.1 mu m) and more divergent (0.1 degrees). So far only the production of unpolarized sub-micron neutron beams has been reported. Here we present first experiments on polarized sub-micron neutron beams. For these studies a polarized incident beam was used and two types of magnetic waveguides were investigated: a polarizing magnetic waveguide Fe(20 nm)/Cu(140 nm)/Fe(50 nm)//glass and a non-polarizing magnetic waveguide Py(10 nm)/Al(140 nm)/Py(50 nm)//glass (Py is permalloy). The waveguide samples were characterized by polarized neutron reflectometry.

• 出版日期2011-6
• 单位中国地震局