Adiabatic partition effect on natural convection heat transfer inside a square cavity: experimental and numerical studies

作者：Mahmoudinezhad S; Rezania A^*; Yousefi T; Shadloo M S; Rosendahl L A^*

来源：Heat and Mass Transfer, 2018, 54(2): 291-304.

DOI：10.1007/s00231-017-2103-7

A steady state and two-dimensional laminar free convection heat transfer in a partitioned cavity with horizontal adiabatic and isothermal side walls is investigated using both experimental and numerical approaches. The experiments and numerical simulations are carried out using a Mach-Zehnder interferometer and a finite volume code, respectively. A horizontal and adiabatic partition, with angle of theta is adjusted such that it separates the cavity into two identical parts. Effects of this angel as well as Rayleigh number on the heat transfer from the side-heated walls are investigated in this study. The results are performed for the various Rayleigh numbers over the cavity side length, and partition angles ranging from 1.5 x 10(5) to 4.5 x 10(5), and 0 degrees to 90 degrees, respectively. The experimental verification of natural convective flow physics has been done by using FLUENT software. For a given adiabatic partition angle, the results show that the average Nusselt number and consequently the heat transfer enhance as the Rayleigh number increases. However, for a given Rayleigh number the maximum and the minimum heat transfer occurs at theta = 45 degrees and theta = 90 degrees, respectively. Two responsible mechanisms for this behavior, namely blockage ratio and partition orientation, are identified. These effects are explained by numerical velocity vectors and experimental temperatures contours. Based on the experimental data, a new correlation that fairly represents the average Nusselt number of the heated walls as functions of Rayleigh number and the angel of theta for the aforementioned ranges of data is proposed.

• 出版日期2018-2