A Stretchable Radio-Frequency Strain Sensor Using Screen Printing Technology

作者：Jeong Heijun; Lim Sungjoon^*

来源：Sensors (Switzerland), 2016, 16(11): 1839.

DOI：10.3390/s16111839

• stretchable dielectric material
• stretchable conductive ink
• PDMS
• stretchable RF resonator

In this paper, we propose a stretchable radio-frequency (RF) strain sensor fabricated with screen printing technology. The RF sensor is designed using a half-wavelength patch that resonates at 3.7 GHz. The resonant frequency is determined by the length of the patch, and it therefore changes when the patch is stretched. Polydimethylsiloxane (PDMS) is used to create the substrate, because of its stretchable and screen-printable surface. In addition, Dupont PE872 (Dupont, NC, American) silver conductive ink is used to create the stretchable conductive patterns. The sensor performance is demonstrated both with full-wave simulations and with measurements carried out on a fabricated sample. When the length of the patch sensor is increased by a 7.8% stretch, the resonant frequency decreases from 3.7 GHz to 3.43 GHz, evidencing a sensitivity of 3.43 x 10(7) Hz /%. Stretching the patch along its width does not change the resonant frequency.

• 出版日期2016-11