Nanoimprint Molds with Circumferentially Aligned Patterns Fabricated by Liftoff Process

作者：Okada Takeru^*; Fujimori Jiro; Iida Tetsuya

来源：Japanese Journal of Applied Physics, 2011, 50(12): 126502.

DOI：10.1143/JJAP.50.126502

A liftoff process was used to fabricate nanoimprint molds with dense patterns below 50 nm pitch. Circumferentially aligned patterns were defined by electron-beam lithography (EBL) using an electron-beam recorder with a rotary stage. Undercut profiles suitable for liftoff were fabricated by etching multilayered resist systems that use a hydrogen silsesquioxane (HSQ) layer as an etching mask for the underlying resin, and liftoff was performed by dissolving the HSQ layer on an insoluble resin layer. By using an undercut profile that was formed in a trilayered stack after EBL, a mold with high-density (42 nm pitch) and large-area (2.5 in.) pillar patterns was fabricated. Quartz replica molds were also fabricated by the liftoff process combined with UV nanoimprint. It was possible to fabricate molds with both a positive tone and a negative tone, and the fabrication of a replica mold with pillar patterns (49 nm pitch) was demonstrated.

• 出版日期2011-12