A simple surrogate test method to rank the wear performance of prospective ceramic materials under hip prosthesis edge-loading conditions

作者：Sanders Anthony P^*; Brannon Rebecca M

来源：Journal of Biomedical Materials Research Part B: Applied Biomaterials , 2014, 102(2): 311-321.

DOI：10.1002/jbm.b.33009

• prosthetic hip
• ceramic
• edge loading
• wear
• Hertzian contact theory
• materials ranking

This research has developed a novel test method for evaluating the wear resistance of ceramic materials under severe contact stresses simulating edge loading in prosthetic hip bearings. Simply shaped test specimens - a cylinder and a spheroid - were designed as surrogates for an edge-loaded, head/liner implant pair. Equivalency of the simpler specimens was assured in the sense that their theoretical contact dimensions and pressures were identical, according to Hertzian contact theory, to those of the head/liner pair. The surrogates were fabricated in three ceramic materials: Al2O3, zirconia-toughened alumina (ZTA), and ZrO2. They were mated in three different material pairs and reciprocated under a 200 N normal contact force for 1000-2000 cycles, which created small (<1 mm(2)) wear scars. The three material pairs were ranked by their wear resistance, quantified by the volume of abraded material measured using an interferometer. Similar tests were performed on edge-loaded hip implants in the same material pairs. The surrogates replicated the wear rankings of their full-scale implant counterparts and mimicked their friction force trends. The results show that a proxy test using simple test specimens can validly rank the wear performance of ceramic materials under severe, edge-loading contact stresses, while replicating the beginning stage of edge-loading wear. This simple wear test is therefore potentially useful for screening and ranking new, prospective materials early in their development, to produce optimized candidates for more complicated full-scale hip simulator wear tests.

• 出版日期2014-2