Additive to regulate the perovskite crystal film growth in planar heterojunction solar cells

作者：Song Xin; Wang Weiwei; Sun Po; Ma Wanli; Chen Zhi Kuan^*

来源：Applied Physics Letters, 2015, 106(3): 033901.

DOI：10.1063/1.4906073

We reported a planar heterojunction perovskite solar cell fabricated from MAPbI(3-x)Cl(x) perovskite precursor solution containing 1-chloronaphthalene (CN) additive. The MAPbI(3-x)Cl(x) perovskite films have been characterized by UV-vis, SEM, XRD, and steady-state photoluminescence (PL). UV-vis absorption spectra measurement shows that the absorbance of the film with CN additive is significantly higher than the pristine film and the absorption peak is red shift by 30 nm, indicating the perovskite film with additive possessing better crystal structures. In-situ XRD study of the perovskite films with additive demonstrated intense diffraction peaks from MAPbI(3-x)Cl(x) perovskite crystal planes of (110), (220), and (330). SEM images of the films with additive indicated the films were more smooth and homogenous with fewer pin-holes and voids and better surface coverage than the pristine films. These results implied that the additive CN is beneficial to regulate the crystallization transformation kinetics of perovskite to form high quality crystal films. The steady-state PL measurement suggested that the films with additive contained less charge traps and defects. The planar heterojunction perovskite solar cells fabricated from perovskite precursor solution containing CN additive demonstrated 30% enhancement in performance compared to the devices with pristine films. The improvement in device efficiency is mainly attributed to the good crystal structures, more homogenous film morphology, and also fewer trap centers and defects in the films with the additive.

• 出版日期2015-1-19
• 单位苏州大学