A Constant-Force Technique to Measure Corneal Biomechanical Changes after Collagen Cross-Linking

作者：Richoz Olivier; Kling Sabine; Zandi Souska; Hammer Arthur; Spoerl Eberhard; Hafezi Farhad^*

来源：PLos One, 2014, 9(8): e105095.

DOI：10.1371/journal.pone.0105095

Purpose: To introduce a constant-force technique for the analysis of corneal biomechanical changes induced after collagen cross-linking (CXL) that is better adapted to the natural loading in the eye than previous methods.
Methods: For the biomechanical testing, a total of 50 freshly enucleated eyes were obtained and subdivided in groups of 5 eyes each. A Zwicki-Line Testing Machine was used to analyze the strain of 11 mm long and 5 mm wide porcine corneal strips, with and without CXL. Before material testing, the corneal tissues were pre-stressed with 0.02 N until force stabilization. Standard strip extensiometry was performed as control technique. For the constant-force technique, tissue elongation (Delta strain, %) was analyzed for 180 seconds while different constant forces (0.25 N, 0.5 N, 1 N, 5 N) were applied.
Results: Using a constant force of 0.5 N, we observed a significant difference in Dstrain between 0.26 +/- 0.01% in controls and 0.12 +/- 0.03% in the CXL-treated group (p = 0.003) over baseline. Similarly, using a constant force of 1 N, Delta strain was 0.31 +/- 0.03% in controls and 0.19 +/- 0.02% after CXL treatment (p = 0.008). No significant differences were observed between CXL-treated groups and controls with 0.25 N or 5 N constant forces. Standard stress-strain extensiometry failed to show significant differences between CXL-treated groups and controls at all percentages of strains tested.
Conclusion: We propose a constant-force technique to measure corneal biomechanics in a more physiologic way. When compared to standard stress-strain extensiometry, the constant-force technique provides less variability and thus reaches significant results with a lower sample number.

• 出版日期2014-8-27