ASA-in-water emulsions stabilized by laponite nanoparticles modified with tetramethylammonium chloride

作者：Tan, Hua; Liu, Wenxia^*; Yu, Dehai; Li, Haidong; Hubbe, Martin A.; Gong, Bei; Zhang, Wei; Wang, Huili; Li, Guodong

来源：Chemical Engineering Science, 2014, 116: 682-693.

DOI：10.1016/j.ces.2014.06.005

• Emulsion
• Nanoparticle
• Adsorption
• Dispersion
• Paper sizing
• Alkenyl succinic anhydride (ASA)

Alkenyl succinic anhydride (ASA) is a widely used paper sizing agent that is applied in the form of oil-in-water (o/w) emulsions in order to impart a water-resistant character to the resulting paper. To obtain stable o/w emulsions of ASA, laponite, a highly hydrophilic synthetic clay, was selected as the stabilizer after it had been modified with tetramethylammonium chloride (TMAC), a quaternary ammonium salt with the shortest possible hydrocarbon groups. It was found that the TMAC moderately neutralized the negative charges of laponite particles, lowered the apparent viscosity, but enhanced the turbidity of laponite aqueous dispersion by enhancing the hydrophobicity of the laponite particles, favoring adsorption of laponite particles on the ASA water interface. Meanwhile, the TMAC significantly decreased the interfacial tension between ASA and water/aqueous laponite dispersion, promoting the formation of an emulsion with small droplets. When the added amount of TMAC reached 1 wt% based on laponite, the as-prepared ASA emulsion had small droplet size, low viscosity and uniform droplet size distribution, and exhibited good creaming/coalescence stability. By using TMAC to modify laponite nanoparticles, the hydrolysis stability and sizing performance of ASA emulsion were also improved.

• 单位
  齐鲁工业大学