摘要

An experimental approach to the characterisation of the complex, multi-scale pore geometry in cement-stabilised soils is presented, in which the pore size distribution inclusively spans at least six orders of magnitude from similar to 3 nm up to %26gt; 3 mm. These most likely result from the combined effects of granular inter-particle packing, clay/cement clothing and bridging effects, cement hydration and clay/cement pozzolanic reactions, and alteration of larger pore geometries as a result of solid mass mobilisation and transport following capillary wetting/drying regimes. Experimental data are presented and were obtained through a combination of X-ray computed tomography, mercury intrusion porosimetry and N-2 physisorption supported by %26apos;wet mode%26apos; environmental scanning electron microscopy. Data strongly suggest that macropore/capillary pore size distribution, mean pore size, sorptivity and transport coefficients are a function of particle size distribution (when compaction energy is constant). Mesopore size distribution, which dominates hygric sorption/desorption behaviour, occurs within the clay/cement matrix and also appears to be strongly influenced by the particle size distribution of the granular phase. All other factors being equal, manipulation of granular particle size distribution can be used to engineer the hygric (vapour) and capillary (liquid) potentials and also the fluid transport coefficients of these materials.

  • 出版日期2013-2