科研之友
微信
新浪微博
Facebook
分享链接
摘要
Gas-solid momentum transfer is a fundamental problem that is characterized by the dependence of normalized average fluid-particle force F on solid volume fraction phi and the Reynolds number based on the mean slip velocity Re(m). In this work we report particle-resolved direct numerical simulation (DNS) results of interphase momentum transfer in flow past fixed random assemblies of monodisperse spheres with finite fluid inertia using a continuum Navier-Stokes solver. This solver is based on a new formulation we refer to as the Particle-resolved Uncontaminated-fluid Reconcilable Immersed Boundary Method (PUReIBM). The principal advantage of this formulation is that the fluid stress at the particle surface is calculated directly from the flow solution (velocity and pressure fields), which when integrated over the surfaces of all particles yields the average fluid-particle force. We demonstrate that PUReIBM is a consistent numerical method to study gas-solid flow because it results in a force density on particle surfaces that is reconcilable with the averaged two-fluid theory. The numerical convergence and accuracy of PUReIBM are established through a comprehensive suite of validation tests. The normalized average fluid-particle force F is obtained as a function of solid volume fraction phi (0.1 <= phi <= 0.5) and mean flow Reynolds number Re(m) (0.01 <= Re(m) <= 300) for random assemblies of monodisperse spheres. These results extend previously reported results of Hill et al. (2001a,b) to a wider range of phi, Re(m), and are more accurate than those reported by Beetstra et al. (2007). Differences between the drag values obtained from PUReIBM and the drag correlation of Beetstra et al. (2007) are as high as 30% for Re(m) in the range 100-300. We take advantage of PUReIBM's ability to directly calculate the relative contributions of pressure and viscous stress to the total fluid-particle force, which is useful in developing drag correlations. Using a scaling argument, Hill et al. (2001b) proposed that the viscous contribution is independent of Re(m) but the pressure contribution is linear in Re(m) (for Rem > 50). However, from PUReIBM simulations we find that the viscous contribution is not independent of the mean flow Reynolds number, although the pressure contribution does indeed vary linearly with Re(m) in accord with the analysis of Hill et al. (2001b). An improved correlation for F in terms of phi and Re(m) is proposed that corrects the existing correlations in Re(m) range 100-300. Since this drag correlation has been inferred from simulations of fixed particle assemblies, it does not include the effect of mobility of the particles. However, the fixed-bed simulation approach is a good approximation for high Stokes number particles, which are encountered in most gas-solid flows. This improved drag correlation can be used in CFD simulations of fluidized beds that solve the average two-fluid equations where the accuracy of the drag law affects the prediction of overall flow behavior.
- 出版日期2011-11
