科研之友
微信
新浪微博
Facebook
分享链接
摘要
AISI 4140 steel was selected as the material and plasma post-oxidation by plain air in the same nitriding system just after plasma nitriding was investigated primarily. The results show that a thin oxide layer composed of Fe3O4 and Fe2O3 is formed, and the ratio of Fe3O4 to Fe2O3 is closely related to the plasma post-oxidizing temperature and time. The highest ratio of Fe3O4 to Fe2O3 is obtained while post-oxidizing at 673 K for 60 min due to lower standard Gibbs free energy and appropriate forming rate for the formation of Fe3O4 at this condition. The thin oxide layer brings out significant improvement of corrosion resistance, especially at higher ratio of Fe3O4 to Fe2O3. Surface images of the corroded specimens after polarization test shows that there exists no corrosion pit for the specimen post-oxidized at 673 K for 60 min, though some corrosion pits exist for those treated under other conditions.
- 出版日期2015-1
- 单位常州大学
