Development of uric acid sensor based on molecularly imprinted polymer-modified hanging mercury drop electrode

作者：Lakshmi D^*; Sharma PS; Prasad BB

来源：Electroanalysis, 2006, 18(9): 918-927.

DOI：10.1002/elan.200603478

• uric acid sensor
• molecularly imprinted polymer-modified hanging mercury drop electrode
• differential pulse
• cathodic stripping voltammetry
• human blood serum

Uric acid (UA) sensor based on molecularly imprinted polymer-modified hanging mercury drop electrode was developed for sensitive and selective analysis in aqueous and blood serum samples. The uric acid-imprinted polymer was prepared from melamine and chloranil and coated directly onto the surface of a hanging mercury drop electrode, under charge-transfer interactions at +0.4V (vs. Ag/AgCl), in model 303A electrode system connected with a polarographic analyzer/stripping voltammeter (PAR model 264A). The binding event of uric acid was detected in the imprinted polymer layer through differential pulse, cathodic stripping voltammetry (DPCSV) at optimized operational conditions [accumulation potential +0.4V (vs. Ag/AgCl), accumulation time 120 s, pH 7.0, scan rate 10 mV s(-1), pulse amplitude 25 mV]. The limit of detection for UA was found to be 0.024 mu g mL(-1) (RSD = 0.64%, S/N = 3). Under the optimized operational conditions, the sensor was able to differentiate between uric acid and other closely structural-related compounds and interfering substances. Ascorbic acid (AA), a major interferent in UA estimation, was not adsorbed on the surface of sensor electrode. The present sensor is, therefore, UA-selective at all concentrations of AA present in human blood serum samples. The precised and accurate quantification of UA have been made in the dilute as well as concentrated regions varying within limits 0.1-4.0 and 9.8-137.0 mu g mL(-1), respectively.

• 出版日期2006-5