Iterative metal artifact reduction for x-ray computed tomography using unmatched projector/backprojector pairs

作者：Zhang Hanming; Wang Linyuan; Li Lei; Cai Ailong; Hu Guoen; Yan Bin

来源：Medical Physics, 2016, 43(6): 3019-3033.

DOI：10.1118/1.4950722

<jats:sec><jats:title>Purpose:</jats:title><jats:p>Metal artifact reduction (MAR) is a major problem and a challenging issue in x‐ray computed tomography (CT) examinations. Iterative reconstruction from sinograms unaffected by metals shows promising potential in detail recovery. This reconstruction has been the subject of much research in recent years. However, conventional iterative reconstruction methods easily introduce new artifacts around metal implants because of incomplete data reconstruction and inconsistencies in practical data acquisition. Hence, this work aims at developing a method to suppress newly introduced artifacts and improve the image quality around metal implants for the iterative MAR scheme.</jats:p></jats:sec><jats:sec><jats:title>Methods:</jats:title><jats:p>The proposed method consists of two steps based on the general iterative MAR framework. An uncorrected image is initially reconstructed, and the corresponding metal trace is obtained. The iterative reconstruction method is then used to reconstruct images from the unaffected sinogram. In the reconstruction step of this work, an iterative strategy utilizing unmatched projector/backprojector pairs is used. A ramp filter is introduced into the back‐projection procedure to restrain the inconsistency components in low frequencies and generate more reliable images of the regions around metals. Furthermore, a constrained total variation (TV) minimization model is also incorporated to enhance efficiency. The proposed strategy is implemented based on an iterative FBP and an alternating direction minimization (ADM) scheme, respectively. The developed algorithms are referred to as “iFBP‐TV” and “TV‐FADM,” respectively. Two projection‐completion‐based MAR methods and three iterative MAR methods are performed simultaneously for comparison.</jats:p></jats:sec><jats:sec><jats:title>Results:</jats:title><jats:p>The proposed method performs reasonably on both simulation and real CT‐scanned datasets. This approach could reduce streak metal artifacts effectively and avoid the mentioned effects in the vicinity of the metals. The improvements are evaluated by inspecting regions of interest and by comparing the root‐mean‐square errors, normalized mean absolute distance, and universal quality index metrics of the images. Both iFBP‐TV and TV‐FADM methods outperform other counterparts in all cases. Unlike the conventional iterative methods, the proposed strategy utilizing unmatched projector/backprojector pairs shows excellent performance in detail preservation and prevention of the introduction of new artifacts.</jats:p></jats:sec><jats:sec><jats:title>Conclusions:</jats:title><jats:p>Qualitative and quantitative evaluations of experimental results indicate that the developed method outperforms classical MAR algorithms in suppressing streak artifacts and preserving the edge structural information of the object. In particular, structures lying close to metals can be gradually recovered because of the reduction of artifacts caused by inconsistency effects.</jats:p></jats:sec>

• 出版日期2016-6