Size effect in gas forming a hot-bent AA5xxx V-shaped trough trimmed for an airplane strakelet skin panel

作者：Lee Shyong; Tang Jung Sung; Chu Chun Lin

来源：International Journal of Advanced Manufacturing Technology, 2016, 86(9-12): 2747-2752.

DOI：10.1007/s00170-016-8380-3

• Superplastic forming
• Gas forming
• Hot-bending-assisted gas forming
• Plastic buckling

Superplastic forming or gas forming is favorable method for the manufacture of sheet metal for making airplane skin panels. However, a major challenge in applying this method is controlling the thickness distribution in the formed product. Here, we explore a hot-bending-assisted process for gas forming of a deep trough with a complex shape for use in airplane wings. We propose the deliberate arrangement of wrinkles to achieve uniform thickness distribution. Because full-scale experiments are costly, sub-scale specimens are preferred for collecting experimental data. In linking sub-scale data to full-scale manufacturing, the size effect on wrinkle formation sites is important. The cause of the pre-form contour and larger-size specimen could be the greater variations in contour modes due to plastic buckling during the pre-forming stage.

• 出版日期2016-10
• 单位中央民族大学