Determination of picomolar silver concentrations by differential pulse anodic stripping voltammetry at a carbon paste electrode modified with phenylthiourea-functionalized high ordered nanoporous silica gel

作者：Javanbakht Mehran^*; Divsar Faten; Badiei Alireza; Fatollahi Fatemeh; Khaniani Yeganeh; Ganjali Mohammad Reza; Norouzi Parviz; Chaloosi Marzieh; Ziarani Ghodsi Mohammadi

来源：Electrochimica Acta, 2009, 54(23): 5381-5386.

DOI：10.1016/j.electacta.2009.04.044

• Anodic stripping voltammetry
• Differential pulse
• Picomolar
• Silver
• Functionalized nanoporous silica gel

This study introduces the design of an anodic stripping voltammetric (ASV) method for the silver ion determination at a carbon paste electrode (CPE). chemically modified with phenylthiourea-nanoporous silica gel (Tu-SBA-15-CPE). The electroanalytical pro includes two steps: preconcentration of metal ions at an electrode surface, followed by quantification of the accumulated species by differential pulse anodic stripping voltammetric methods. Factors affecting the performance of the anodic stripping were investigated, including the modifier quantity in the paste, the electrolyte concentrations, the solution pH and the accumulation potential or time. The most sensitive and reliable electrode contained 10% Tu-SBA-15 and 90% carbon paste. The accumulation potential and time were set at, -200 mV and 300 s, respectively, and the scan rate at 50 mV s(-1) in the scan range of -200 to 700 mV. The resulting electrode demonstrated a linear response over range of silver ion concentration of 8.0-80 pmol/L with detection limit (S/N = 3) of 5 pmol/L The prepared electrodes were used for the silver determination in sea and tap water samples and very good recovery results were obtained. The accuracy was assessed through recovery experiments and independent analysis by graphite furnace atomic absorption spectrometry.

• 出版日期2009-9-30