Assessment of operating parameters for photocatalytic degradation of a textile dye by Fe2O3/TiO2/clinoptilolite nanocatalyst using Taguchi experimental design

作者：Arimi Arsou; Farhadian Mehrdad; Nazar Ali Reza Solaimany; Homayoonfal Maryam

来源：Research on Chemical Intermediates, 2016, 42(5): 4021-4040.

DOI：10.1007/s11164-015-2255-3

• Nanophotocatalyst
• Wastewater treatment
• Textile industry
• AOPs
• Taguchi method

In the current study, a nanophotocatalyst doped with of TiO2 and Fe2O3 nanoparticles supported on Iranian clinoptilolite was synthesized and characterized by XRD, XRF, SEM, and EDX analyses. The results suggested the successful loading of TiO2 and Fe2O3 nanoparticles onto the surface of clinoptilolite. The SEM images confirmed the average size of nanoparticles deposited on zeolite, which was about 20-40 nm. Furthermore, application of the synthesized photocatalyst in photocatalytic degradation of Acid Black 172 dye was studied using the Taguchi method and the chosen parameters were as follows: pH (2-7), dye concentration (50-200 mg/l), irradiation time (30-120 min), and catalyst dosage (0.5-1.5 g/l). The results indicate that dye concentration, pH, and irradiation time are respectively the most effective factors in these experiments while with the minimum dosage of the catalyst (0.5 g/l), up to 90 % removal efficiency could be achieved. The optimum value for each parameter was pH = 2, dye concentration = 50 mg/l, catalyst dosage = 1 g/l and irradiation time = 60 min, and the dye removal efficiency reached up to 100 % at these optimal conditions. Furthermore, after five-times recycling and reusing the catalyst, the efficiency of the photocatalytic degradation was reduced from 91.5 to 65.9 %, which is still an acceptable value.

• 出版日期2016-5