An experimental study on thermal conductivity of iron ore sand cement mortar

作者：Liu, Kai^*; Wang, Zhi; Jin, Can; Wang, Fang; Lu, Xueyuan

来源：Construction and Building Materials, 2015, 101: 932-941.

DOI：10.1016/j.conbuildmat.2015.10.108

• Thermal conductivity
• Cement mortar
• Iron ore sand
• Hot-wire method
• Laser flash method

The objective of this paper is to determine the effect of water-cement ratio, total sand-cement ratio, river sand-iron ore sand ratio, temperature and density on the thermal conductivity of iron ore sand (IOS) cement mortar. The IOS was filtered by wet magnetic separator and incorporated in a cement mortar mixture. The hot-wire method and the laser flash method were used to test the thermal conductivity of the IOS cement mortar. Meanwhile, the SPSS partial correlation analysis was conducted to determine the precedence of the five factors according to their effects on thermal conductivity. After that, a prediction formulation of thermal conductivity was developed with MATLAB. Experimental results show that among the five factors, river sand-iron ore sand ratio ranks the best effect on thermal conductivity, followed by water-cement ratio, total sand-cement ratio, temperature and density in sequence.

• 出版日期2015-12-30
• 单位合肥工业大学