Anodic oxidation-assisted O-2 oxidation of phenol catalyzed by Fe3O4 at low voltage

作者：Lei, Lei; Fang, Li-Ming; Zhai, Lin-Feng^*; Wang, Ran; Sun, Min^*

来源：Electrochimica Acta, 2018, 261: 394-401.

DOI：10.1016/j.electacta.2017.12.155

• Anodic oxidation-assisted O-2 oxidation
• Phenol degradation
• Fe3O4
• Low voltage
• Electron transfer

Environmentally friendly and economically feasible technology is urgently needed for the management of phenolic compounds. Here, low-voltage degradation of phenol is achieved in an anodic oxidation (AO)-assisted O-2 oxidation process with Fe3O4/graphite felt (GF) composite anode. Batch experiments on phenol degradation at 0.6 V achieve phenol removal in 78 h, and the total mineralization of phenol is obtained in 90 h at the first cycle. The time required for phenol removal is reduced to 48 h after three cycles of operation, meanwhile mineralization of phenol being completed in 51 h. The AO-assisted O-2 oxidation process is confirmed to adopt a non-radical pathway in which the phenol is degraded at the catalytic sites of GF under the synergy of O-2 and anodic electric field. Phenol degradation efficiency at the Fe3O4/GF composite anode is significantly higher than that at the GF, which is ascribed to the accelerated electron transfer by Fe3O4. The Fe-C and Fe-O-C bonds are identified as inherent linkages responsible for electron transfer between the Fe3O4 and GF. Process efficiency is able to be spontaneously enhanced in recycling operation due to the intensification of Fe-C and Fe-O-C bonds. The low energy cost and application of cheap carbonaceous anode endow the AO-assisted O-2 oxidation process with great potential for use in the remediation of phenol pollutant.

• 出版日期2018-1-20
• 单位合肥工业大学