摘要

As a key severe accident management strategy for light water reactors (LVVRs), in-vessel retention (IVR) through external reactor vessel cooling (ERVC) has been the focus of relevant studies for decades. However, previous studies only investigated the molten pool configurations considered to be in a final steady state mainly for reactors of such as AP600 and AP1000. Furthermore, most of studies performed in the past dealt with analysis for an isolated IVR-ERVC process, without considering the strong coupling between the internal and external reactor pressure vessel (RPV) conditions. This paper addresses the IVR-ERVC issues from a transient perspective using the severe accident code MELCOR for a large advanced passive power plant: a three-loop, 5000 MWt scale pressurized water reactor with passive safety features. The analysis is mainly focused on the severe accident transients including core degradation and relocation, molten pool formation and growth, and heat transfer within a molten pool. Furthermore, internal and external RPV conditions are combined together in the IVR-ERVC analysis. MELCOR calculations for lower head heat flux are then compared with critical heat flux (CHF) to assess the effectiveness of IVR-ERVC. The results suggest that lower head heat flux is below the CHF value. Therefore, the IVRERVC strategy for this large PWR is considered to be feasible. It was also found that as the reactor power is raised to large scale PVVR, new accident sequences may occur during the severe accident evolution, thus leading to a proposal of a completely new molten pool configuration for future studies.