A comparison of micro-structured flat-plate and cross-cut heat sinks for thermoelectric generation application

作者：Rezania A; Rosendahl L A

来源：Energy Conversion and Management, 2015, 101: 730-737.

DOI：10.1016/j.enconman.2015.05.064

• Thermoelectric generator
• Plate-fin heat sink
• Cross-cut heat sink
• Maximum net power

Heat sink configuration has strong impact on net power output from thermoelectric generators (TEGs). A weak cooling strategy can even cause negative net power output from the thermoelectric device. However, the net power output can be significantly improved by optimal design of the heat sink. In this study, a micro-structured plate-fin heat sink is compared to a modified design of cross-cut heat sink applied to TEGs over a range of temperatures and thermal conductivities. The particular focus of this study is to explore the net power output from the TEG module. The three-dimensional governing equations for the flow and heat transfer are solved using computational fluid dynamics (CFD) in conjunction with the thermoelectric characteristics of the TEG over a wide range of flow inlet velocities. The results show that at small flow inlet velocity, the maximum net power output in TEG with plate-fin heat sink is higher, while the TEG with cross-cut heat sink has higher maximum net power output at high flow inlet velocity. The maximum net power output is equal in the TEGs with plate-fin heat sink and-cross-cut heat sink.

• 出版日期2015-9-1