Negative pressure and spallation in graphite targets under nano- and picosecond laser irradiation

作者：Belikov R S^*; Krasyuk I K; Rienecker T; Semenov A Yu; Rosmej O N; Stuchebryukhov I A; Tomut M; Khishchenko K V; Schoenlein A

来源：Quantum Electronics, 2015, 45(5): 421-425.

DOI：10.1070/QE2015v045n05ABEH015759

• laser radiation of picosecond and nanosecond duration
• ablation pressure
• shock wave
• negative pressure
• spallation phenomenon
• strain rate
• ultimate strength
• numerical simulation
• graphite

We present the results of experiments on the spallation phenomena in graphite targets under shock-wave nano- and picosecond irradiation, which have been performed on Kamerton-T (GPI, Moscow, Russia) and PHELIX (GSI, Darmstadt, Germany) laser facilities. In the range of the strain rates of 10(6)-10(7) s(-1), the data on the dynamic mechanical strength of the material at rapure (spallation) have been for the first time obtained. With a maximal strain rate of 1.4 x 10(7) s(-1), the spall strength of 2.1 GPa is obtained, which constitutes 64% of the theoretical ultimate tensile strength of graphite. The effect of spallation is observed not only on the rear side of the target, but also on its irradiated (front) surface. With the use of optical and scanning electron microscopes, the morphology of the front and rear surfaces of the targets is studied. By means of Raman scattering of light, the graphite structure both on the target front surface under laser exposure and on its rear side in the spall zone is investigated. A comparison of the dynamic strength of graphite and synthetic diamond is performed.

• 出版日期2015