Adiabatic Shear Band of TC4 Alloy during Warm Compression

作者：Ge Changjian^*; Li Miaoquan

来源：Rare Metal Materials and Engineering, 2014, 43(9): 2069-2074.

DOI：10.1016/s1875-5372(14)60150-8

• TC4 alloy
• warm compression
• adiabatic shear band
• microstructure evolution

The adiabatic shear band (ASB) forming in the warm compression of TC4 titanium alloy was investigated at a strain rate of 50 s(-1) and the deformation temperatures ranging from 560 to 660 degrees C. The results show that the deformation temperature affects significantly the formation of the ASBs. The shear band width increases from 85 mu m to 140 mu m as the deformation temperature increases. The corresponding Vickers micro-hardness values of the ASB are higher than that of the matrix due to the strain hardening and fine grains in ASB. Meanwhile the microstructure evolution mechanism within the ASB was discussed. Large strain and high temperature make the occurrence of dynamic recrystallization (DRX) in ASB, leading to the formation of equiaxed DRX grains with a grain size about 200 nm. The ASBs in this study have both the characteristics of deformed band and transformed band.

• 出版日期2014-9
• 单位西北工业大学