AC losses for the various voltage-leads in a semi-triple layer BSCCO conductor

作者：Li Z; Ryu K^*; Hwang S D; Cha G; Song H J

来源：Physica C-Superconductivity and Its Applications, 2011, 471(21-22): 1554-1558.

DOI：10.1016/j.physc.2011.05.237

• AC loss
• HTS cable
• Multilayer conductor
• Voltage-lead
• Wire loss

In order to investigate the AC loss of the multilayer conductor in a high temperature superconductor cable, a voltage-lead was generally attached to the outermost layer of the conductor. But the conductor's AC loss has not been completely cleared due to the various contact positions and arrangements of the voltage-lead. In this paper, we prepared a semi-triple layer conductor consisting of an inner layer and an outer layer with double layer structure. To measure the AC loss of the conductor, two voltage-leads (inner-lead, outer-lead) were soldered to the wires in each layer and arranged along their surfaces, as well as another voltage-lead (total-lead) was soldered to the inner layer and arranged on the surface of the outer layer. The results show that the AC losses for each layer measured from the inner-lead and the outer-lead, respectively, are identical to the sum of the wire losses. The AC losses in the semitriple layer conductor measured from the total-lead and the outer-lead are identical for the uniform layer current density, and similar to the sum of the wire losses in both layers. However, the losses measured for the non-uniform layer current density from three voltage-leads are unequal to each other, and the loss from the total-lead significantly differs from the sum of the wire losses.

• 出版日期2011-11