Microstructure evolution during homogenization of Al-Mn-Fe-Si alloys: Modeling and experimental results

作者：Du Q^*; Poole W J; Wells M A; Parson N C

来源：Acta Materialia, 2013, 61(13): 4961-4973.

DOI：10.1016/j.actamat.2013.04.050

• Homogenization heat treatment
• Microstructure modelling
• CALPHAD
• Aluminium alloys

Microstructure evolution during the homogenization heat treatment of Al-Mn-Fe-Si, or AA3xxx, alloys has been investigated using a combination of modeling and experimental studies. The model is fully coupled to CALculation PHAse Diagram (CALPHAD) software and has explicitly taken into account the two different length scales for diffusion encountered in modeling the homogenization process. The model is able to predict the evolution of all the important microstructural features during homogenization, including the inhomogeneous spatial distribution of dispersoids and alloying elements in solution, the dispersoid number density and the size distribution, and the type and fraction of intergranular constituent particles. Experiments were conducted using four direct chill (DC) cast AA3xxx alloys subjected to various homogenization treatments. The resulting microstructures were then characterized using a range of characterization techniques, including optical and electron microscopy, electron micro probe analysis, field emission gun scanning electron microscopy, and electrical resistivity measurements. The model predictions have been compared with the experimental measurements to validate the model. Further, it has been demonstrated that the validated model is able to predict the effects of alloying elements (e.g. Si and Mn) on microstructure evolution. It is concluded that the model provides a time and cost effective tool in optimizing and designing industrial AA3xxx alloy chemistries and homogenization heat treatments.

• 出版日期2013-8