An improved microbond test method for determination of the interfacial shear strength between carbon fibers and epoxy resin

作者：Wang Hao; Wang Hankun; Li Wanju; Ren Dan; Yu Yan^*

来源：Polymer Testing, 2013, 32(8): 1460-1465.

DOI：10.1016/j.polymertesting.2013.09.017

• Microbond test
• Interfacial shear strength
• Carbon fibers
• Epoxy resin

An improved microbond method, with a corresponding testing device, was developed to measure the interfacial shear strength (IFSS) between carbon fibers and epoxy resin. Compared to other methods, this proposed approach is both highly efficient and easy to operate. As a case study for this new method, we measured the IFSS between carbon fibers and epoxy resin. Although the average IFSS obtained was only 7.08 MPa, which is much lower than values documented in several previous studies, the displacement-load curves demonstrate the strong reliability of this method. The lower IFSS could be explained by the highly inert surface of the carbon fibers, which was highly graphitized and had no sizing treatment. Therefore, this method has high potential in applications for screening the sizing agents of carbon fibers or optimizing the surface sizing processes.

• 出版日期2013-12
• 单位国际竹藤中心