科研之友
微信
新浪微博
Facebook
分享链接
摘要
This paper describes the design, microfabrication, and testing of a novel polyerystalline-diamond (poly-C)-based microprobe for possible applications in neural prosthesis. The probe utilizes undoped poly-C with a resistivity on the order of 10(5) Omega.cm as a supporting material, which has a Young's modulus in the range of 400-1000 GPa and is biocompatible. Boron-doped poly-C with a resistivity on the order of 10(-3) Omega.cm is used as an electrode material, which provides a chemically stable surface for both chemical and electrical detections in neural studies. The probe has eight poly-C electrode sites with diameters ranging from 2 to 150 mu m; the electrode capacitance is approximately 87 mu F/cm(2). The measured water potential window of the poly-C electrode spans across negative and positive electrode potentials and typically has a total value of 2.2 V in 1 M KCl. The smallest detectable concentration of norepinephrine (a neurotransmitter) was on the order of 10 nM. The poly-C probe has also been successfully implanted in the auditory cortex area of a guinea pig brain for in vivo neural studies. The recorded signal amplitude was 30-40 mu V and had a duration of 1 ms. [2008-0195]
- 出版日期2009-6
- 单位国家自然科学基金委员会
