Development of a Topology Optimization Program Considering Density and Homogeni-Zation Methods

作者：Kim Hyun Jun; Kim Bae Young; Suh Myung Won^*

来源：International Journal of Precision Engineering and Manufacturing, 2011, 12(2): 303-312.

DOI：10.1007/s12541-011-0040-9

• Density method
• Homogenization method
• Volume fraction
• Threshold value
• Topology optimization
• Rolling-stock leading-cab

In most previous studies of topology optimization, commercial programs, such as Optistruct, ANSYS, and MSC Patron, usually were used during implementation. Such commercial programs are not easy to use and entail time and cost. In addition, it is difficult to confirm results with reference to individual stages of optimization. For addressing this disadvantage, a topology optimization program, which is based on the C language, is developed in this study. This is a very convenient and powerful program for users to conduct topology optimization by using all density methods and homogenization methods in compliance with the methodology. For verifying the developed program, first of all, topology optimization was implemented by using density methods to evaluate the strain energy density of a cantilever plate and a simply supported plate, which are simple models. The feasibility of the program was verified through a comparison of the results with those from Optistruct, which is a commercial program. Finally, topology optimization was implemented with regard to the rolling-stock leading-cab, which is an application model. Through the Ls-Dyna program, the collision characteristic was also confirmed. Next, through homogenization methods, crash analysis was implemented in the rolling-stock leading-cab. By the use of the internal energy density as deduced from the collision interpretation, topology optimization was implemented. The optimal values, by which the internal energy was maximized per unit weight, of the parameters of homogenization methods were deduced. By the use of Ls-Dyna program for the optimum model, where internal energy is maximized per unit weight, the crash characteristic was confirmed on the basis of the optimization result and the feasibility of the result was verified. This methodology deduces the axis compression deformation by implementing the role of a crash initiator during collision. In addition, the economic advantage of light-weight cars also can be deduced.

• 出版日期2011-4