科研之友
微信
新浪微博
Facebook
分享链接
摘要
A flexible silicon barrier diode was fabricated by the transfer printing method. Micro-line patterned p-type single crystalline silicon membranes were created from a silicon on insulator wafer. The dark current of our device was very low, about 1 pA for reverse bias voltages up to 5 V, and showed rectifying behavior with an ideality factor of 1.05. The photo-response and the responsivity was 32 and 0.3 A/W, respectively, for light intensity of 1.2 mW/cm(2). Also, the current of the photodetector changed under compressive stress or tensile stress. Our device is functional as the piezotronic sensor as well as the photodetector.
- 出版日期2013-1-14
