A comparative study on modified Zerilli-Armstrong, Arrhenius-type and artificial neural network models to predict high-temperature deformation behavior in T24 steel

作者：Li, Hong-Ying^*; Wang, Xiao-Feng; Wei, Dong-Dong; Hu, Ji-Dong; Li, Yang-Hua

来源：Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012, 536: 216-222.

DOI：10.1016/j.msea.2011.12.108

• T24 steel
• Hot compression deformation
• Constitutive equation
• Flow stress

The true stress-strain data from isothermal hot compression tests on Gleeble-3500 thermo mechanical simulator, in a wide range of temperatures (1323-1473K) and strain rates (0.01-10 s(-1)), were employed to establish the constitutive equations based on modified Zerilli-Armstrong and strain-compensated Arrhenius-type models respectively, and develop the artificial neural network model to predict the high-temperature flow stress of T24 steel. Furthermore, a comparative study has been made on the capability of the three models to represent the elevated temperature flow behavior of this steel. Suitability of the three models were evaluated by comparing the accuracy of prediction of deformation behavior, correlation coefficient and average absolute relative error of prediction, the number of material constants, and the time needed to evaluate these constants. The results showed that the predicted values by the modified Zerilli-Armstrong model could agree well with the experimental values except under the strain rate of 0.01 s(-1). The predicted flow stress of the other two models shows good agreement with the experimental data. However, the artificial neural network model could track the deformation behavior more accurately throughout the entire temperature and strain rate range though it is strongly dependent on extensive high quality data and characteristic variables and offers no physical insight.

• 出版日期2012-2-28
• 单位中南大学