Spark Plasma Sintering of Alumina Composites with Graphene Platelets and Silicon Carbide Nanoparticles

作者：Liu Jian^*; Li Zheng; Yan Haixue; Jiang Kyle

来源：Advanced Engineering Materials, 2014, 16(9): 1111-1118.

DOI：10.1002/adem.201300536

This paper reports a study on sintering and characterization of alumina (Al2O3) ceramic composites with graphene platelets (GPLs) and silicon carbide (SiC) nanoparticles. 1, 3, and 5vol% SiC and 0.38vol% GPL are mixed with Al2O3 powders and sintered in a spark plasma sintering system. The microstructures and mechanical properties of the composites are investigated. It is found that the composites reinforced with the dual fillers exhibit more uniform and finer microstructures than pure Al2O3 and average grain sizes of the composites decrease with the increasing percentage of SiC. Compared with pure Al2O3, the composites show approximately a 36% increase in hardness, a 40% increase in flexural strength and a 50% increase in fracture toughness. Toughening mechanisms induced by GPLs, such as crack bridging, pullout and crack deflection in the composites, are observed and discussed.

• 出版日期2014-9