摘要

We present a new method for non-destructively calculating sub-core scale permeability distributions within a core. The new method integrates experimentally measured capillary pressure data and sub-core scale saturation and porosity data collected using a computed tomography-scanner, to construct an accurate and unique sub-core scale permeability distribution. Using this procedure, it is possible to conduct highly refined simulations of core flooding experiments without typical assumptions requiring the core to be homogeneous, or relying on inaccurate porosity-based methods for estimating permeability distributions. The calculation procedure is described and results from two example rock cores are presented, a Berea Sandstone and a sandstone from the Otway Basin Pilot Project in Australia. Drainage coreflooding experiments of carbon dioxide ( injection into water are first conducted on both cores and permeability distributions are calculated using the experimental data. Numerical simulations of the very same experiments are then conducted to demonstrate the accuracy of the calculated sub-core scale permeability distribution. Results from both cores show that the input sub-core scale saturation distributions are predicted with an correlation of greater than 0.93. This is compared to having no correlation when using simple porosity-only based permeability distributions, or assuming homogeneous core properties (Krause et al., SPE J 16(4):768-777, 2011). The uniqueness of the calculated permeability distribution is then demonstrated by calculating permeability distributions for the same core using data collected at different injection fractional flows. Results show that the two independently calculated permeability distributions agree within the limits of experimental measurement error.

  • 出版日期2013-7

全文