Adaptive control of the shifting process in automatic transmissions

作者：Shi, G.; Dong, P.^*; Sun, H. Q.; Liu, Y.; Cheng, Y. J.; Xu, X. Y.

来源：International Journal of Automotive Technology, 2017, 18(1): 179-194.

DOI：10.1007/s12239-017-0018-4

• Automatic transmission
• Adaptive control strategy
• Shift quality
• Torque to pressure characteristic
• Pressure to current characteristic

This paper focuses on the way of keeping shift quality of automatic transmissions consistent in mass production and with mileage accumulation. We investigate the main factors influencing the consistency of shift quality. Test results show that the torque to pressure (T2P) and pressure to current (P2I) characteristics of shifting elements are easily affected. A simulation model of an 8-speed automatic transmission is established to simulate the dynamic process of clutch-to-clutch shift. Simulation results demonstrate that the change of T2P and P2I characteristics has a significant influence on shift quality. In order to compensate for the influences, we develop two adaptive control strategies, i.e., the adaptive control strategies for torque phase and inertia phase. They make use of the measured speed information and time information to evaluate shift quality. Then the control parameters are tuned to adapt to the change of T2P and P2I characteristics. Vehicle tests verify that the developed adaptive control strategies are effective to keep shift quality consistent in mass production and with mileage accumulation.

• 出版日期2017-2
• 单位北京航空航天大学