A high average power beam dump for an electron accelerator

作者：Liu Xianghong^*; Bazarov Ivan; Dunham Bruce M; Kostroun Vaclav O; Li Yulin; Smolenski Karl W

来源：Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment , 2013, 709: 37-43.

DOI：10.1016/j.nima.2013.01.037

• Beam dump
• Electron accelerator
• High power
• Aluminum

The electron beam dump for Cornell University's Energy Recovery Linac (ERL) prototype injector was designed and manufactured to absorb 600 kW of electron beam power at beam energies between 5 and 15 MeV. It is constructed from an aluminum alloy using a cylindrical/conical geometry, with water cooling channels between an inner vacuum chamber and an outer jacket. The electron beam is defocused and its centroid is rastered around the axis of the dump to dilute the power density. A flexible joint connects the inner body and the outer jacket to minimize thermal stress. A quadrant detector at the entrance to the dump monitors the electron beam position and rastering. Electron scattering calculations, thermal and thermomechanical stress analysis, and radiation calculations are presented.

• 出版日期2013-5-1