科研之友
微信
新浪微博
Facebook
分享链接
摘要
This paper considers the sampling of temporal or spatial wide sense stationary (WSS) signals using a co-prime pair of sparse samplers. Several properties and applications of co-prime samplers are developed. First, for uniform spatial sampling with and sensors where and are co-prime with appropriate interelement spacings, the difference co-array has O(MN) freedoms which can be exploited in beamforming and in direction of arrival estimation. An M-point DFT filter bank and an N-point DFT filter bank can be used at the outputs of the two sensor arrays and their outputs combined in such a way that there are effectively MN bands (i.e., MN narrow beams with beamwidths proportional to 1/MN), a result following from co-primality. The ideas are applicable to both active and passive sensing, though the details and tradeoffs are different. Time domain sparse co-prime samplers also generate a time domain co-array with O(MN) freedoms, which can be used to estimate the autocorrelation at much finer lags than the sample spacings. This allows estimation of power spectrum of an arbitrary signal with a frequency resolution proportional to 2 pi/(MNT) even though the pairs of sampled sequences x(c)(NTn) and x(c)(MTn) in the time domain can be arbitrarily sparse - in fact from the sparse set of samples x(c)(NTn) and x(c)(MTn) one can estimate O(MN) frequencies in the range vertical bar omega vertical bar < pi/T. It will be shown that the co-array based method for estimating sinusoids in noise offers many advantages over methods based on the use of Chinese remainder theorem and its extensions. Examples are presented throughout to illustrate the various concepts.
- 出版日期2011-2
